Pivoting Anchor Roller | 16 kg

The P1301 pivoting anchor roller is manufactured from hand-polished, acid-proof stainless steel (AISI 316) and is designed for anchors weighing up to 16 kg.

This model is recommended for our Classic series bowsprits and is well-suited for Bruce-type anchors. While technically compatible with the Performance and Ultimate series, it is not the recommended choice for those bowsprit classes.

The construction features two grooved plastic rollers. To ensure the anchor runs freely through the mechanism, both the anchor neck and shank must fit within the grooves and not exceed a width of 10 mm.

The recommended anchor weight limit is based on the physical size of the anchor rather than the load capacity of the bowsprit. Our bowsprits are designed to handle high loads, but an anchor exceeding the recommended size results in an installation that is difficult to manage. This poses a risk of damage to both the boat and the bowsprit during handling. If the anchor weight exceeds 16 kg or the neck and shank width is greater than 10 mm, a larger anchor roller model should be used.